Are you making these eight, common mistakes when driving on track?

Driving your street car on a the track can be one of the most fun and rewarding things you’ll ever experience, but get it wrong and things can quickly turn sour. Here are eight common mistakes you should avoid on track…

The full specification and disc configuration for this particular application can be found in the 'ADDITIONAL INFORMATION' tab. All TAROX 'Bespoke' discs are made to order at our facility in Italy and are available with the following facings: F2000 - Long curved grooves; Sport Japan - drilled and grooved; C83 - short straight grooves. Tarox MicroTower 280S PCGigabyte GA-H55M-UD2H Mainboard,Intel Core i5 750 2.66GHz 8MB Cache,4GB DDR3-RAM (2x 2GB)1TB Hitachi Deskstar Saturn C HDD 7.200rpm 3.

1 – Trying to compete with pro drivers

• Graphics driver for systems with Intel 865 based systems Get the latest driver Please enter your product details to view the latest driver information for your system.
• Welcome to the TAROX support page. Here you can register your new TAROX product. The registration of a new product guarantees that if you have difficulties with the installation or require technical support in the future, we can treat your query quickly and efficiently.
• Usually reserved for the most serious of track drivers two piece discs save critical un-sprung weight while the materials used allow for much greater thermal stability. Here we have one of our best selling applications the Hyundai i30N 345mm front discs one piece. 21.5kg per pair two piece. 18.5kg per pair 3kg of rotating un-sprung mass can.

Professional drivers have spent much of their lives at circuits. They’re highly trained, do a lot of practice and have normally been racing it since they were very young. These guys have completed hundreds of hours at the wheel, often repeating unexciting long-run tests where their every action is monitored by sophisticated telemetry.

Therefore driving like a professional is not something you can learn on a Sunday afternoon at Button Willow. Pro drivers use the car differently; their speed comes from a smoothness, which makes driving look easy; they understand the limits of the car and track, and will put much less strain on mechanical parts – even though they are inevitably going faster than everyone else. Don’t try and compete with these guys.

2 – Over estimating your car’s capability

Unless you’ve been given a tour of a competition vehicle by a race car engineer, it can be hard to fully understand that road and race cars are very different machines. Both vehicles are designed and built for a set purpose, which means that unless you’re lucky enough to own something track-focused like a Porsche GT3 RS, your road car isn’t going to handle lap after lap of extreme use.

Modifying the suspension, brakes and tires obviously helps combat some of the stress a track environment creates, but there’s one factor that makes the biggest difference – weight. A TCR spec Honda Civic Type R, for example, is around 500 lbs lighter than the street version, which has a big impact on the rate of tire and brake wear.

It’s also easy to forget that professionally maintained race cars are stripped down after each event to check all the components for wear and fatigue. Braking components are carefully monitored, mileage recorded, and worn out components replaced. If a team on a budget finds some cracks in a brake rotor, they use them for free practice only. A works team, will simply throw it in the trash. This ensures competition cars are always at the peak of performance; the same cannot be said of your average street car.

3 – Overconfidence

We all remember our first driving lessons when controlling the car is a completely new experience. However, after a few years it’s easy to start thinking you’re the next Dale Earnhardt. Realistically, very few of us are as good as an average racing driver, let alone a champion, so it’s highly recommended to get some professional instruction. If you’re planning to take your car on track, the benefits of a performance driving course are significant. Learning how to control the car on reduced grip surfaces will ultimately lead to a better understanding about a vehicle’s dynamics. This will translate to a smoother driving style and quicker lap times, while also placing less stress on critical components.

4 – The wrong brake pads

Does the perfect all round brake pad exist? No, not really. There are good all-round pads available; the TAROX Corsa is a great example, but it isn’t perfect for everything. The problem is that the perfect pad for the track is unsuitable for road use, and, in most cases, actually illegal. Likewise the perfect fast-road brake pad, which will work well from cold, cannot cope with the temperatures generated on track and will wear out very quickly; it’s been known for people to be stranded at a circuit as they literally have no brakes left after a track day.

Our advice would be to use a pad like the TAROX Strada for general fast-road use and take a set of TAROX Competitzione pads with you to the track. Just be mindful that a lot of racing pads can deposit on the brake rotor under heavy use. Be sure to follow the manufacturers’ guidelines when bedding in. Misuse of racing pads can be detrimental to rotor life. Remember: never use new pads on old rotors, as performance and safety will be severely affected.

5 – Resting your foot on the brake pedal

Here’s a typical situation: the red flag is out, so you drive into pit road and patiently wait for the track to re-open, with your foot resting on the brake pedal. This apparently innocent action causes the thermal print of the brake pad, which is at track temperature, to begin a bonding process to the rotor braking surface. This is the quickest way to achieve brake pad transfer and even thermal cracking.

Brake pad transfer will cause areas of the affected brake rotor to have high spots, which will ultimately result in a vibration, usually felt through the steering, and almost always wrongly diagnosed as a warped rotor. The problem can be easily solved by skimming the rotors yet, if you understand it beforehand, you can avoid this by not sitting on the brake pedal after a fast lap. It’s for the same reason that you should leave the handbrake off after a session. Be aware that because this is not a manufacturing fault of either the brake pad or brake rotor supplier, no warranty claims can be made.

6 – Believing higher DOT fluid is better for track

DOT3, DOT4, DOT5 and DOT5.1 are standards adopted by our Department of Transport. Their designation is linked to their minimum performance, rather than a numerical ranking, and one DOT grade may cover a wide performance range. For example, DOT 4 brake fluid boiling points will range from a minimum of 450°F to over 570°F. DOT 5.1 fluids have mid-range boiling points – a figure of around 520°F being typical – and their main advantage is in the improved low-temperature viscosity, which is only relevant in very cold climates.

Much of the research into developing the performance of brake fluid is focusing on DOT4, which some companies refer to as ‘Super DOT4’. DOT4 is what most European auto manufacturers recommend, so it’s possible with a fluid like TAROX RoadRace, to have a fluid that’s not only compatible with a manufacturer’s warranty guidelines, but that also has a higher boiling point than many DOT5.1 race fluid.

When choosing a brake fluid you should select one with a high boiling temperature that is retained through its service. Brake fluids are hygroscopic – that is they slowly absorb water when exposed to the atmosphere, which can significantly reduce their boiling point. The so-called “wet” boiling point test is designed to give a measure of how well the boiling point will be retained in service. Some performance brake fluids have a very high boiling point, but this may deteriorate rapidly and need to be replaced more often. So, if you do not want to be constantly topping up the brake fluid, finding a compromise is recommended. Just remember: when changing brake fluid, never drain the system completely, as this will allow air into the system which may be very difficult to remove. Instead, make sure the reservoir is kept topped up as bleeding proceeds.

Trox Driver Sdtx40

7 – Relying on your warranty

Unless you have specialist track day insurance, if something happens while you’re on track, then it’s your problem. From expensive barrier repair bills at the Nürburgring Nordschleife, to engine failure, clubman racing and track days can prove expensive. The fact is warranties that apply for cars used on the road are not applicable on the track, whether this be from the OE manufacturer or the aftermarket. Manufacturers often state that their parts work well in a track environment (we ourselves claim the F2000 brake rotor performs great on track). This isn’t a validation of a warranty for track use – no part ever comes with a racing or track warranty. If a part performs well in a racing environment and has less failures than a competitor’s product, this is what a team will choose – not because they are refunded or compensated for the part. Track and racing environments will highlight quality and establish reputations.

8 – Not checking your car after a session

Tarox Driver Download

Driving on track will subject a road car to an incredible amount of stress, which most of its components weren’t designed to cope with. So it’s a bad idea to drive back home from the circuit and forget about it until the next time you hit the track. We’ve mentioned how race cars are fastidiously stripped down and thoroughly checked to make sure that the components are working properly and are effective for the next race meeting. Likewise each car used on track should be checked, especially the essential brake components. Rotors should be checked for uneven wear or signs of fatigue, pads for a sufficient level of friction material, hoses for adequate free play and interference with suspension.

Unless you’re a very competent home mechanic, it is highly recommended that a professional takes care of all braking related maintenance and servicing.